top of page

 

Both with Advanced Controls 

The advanced EcoSpring Hot Water Heat Pumps allows you to control your hot water requirements with an easy to use Control Panel. 

 

Economy Mode

The unit utilises the heat pump to heat water. This is the most efficient model possible, thus allowing the greatest savings.

While the unit uses the heat pump as its primary means to heat the water, the standard electric elements will activate if the ambient air temperature is low. -7°C <T4< 12°C

 

Models

EcoSpring Heat Pump Hot Water Cylinders comes in 2 models, both with the same great features,
the only difference being the size.

 

Hybrid Mode 

While the unit uses the heat pump as its primary means to heat the water, the standard electric elements will activate if the ambient air temperature is low. -7°C <T4< 12°C

 

e-Heater Mode 

This mode shuts off the heat pump and only uses the electric elements to heat the water, just like a standard electric water heater. eHeat mode allows for operation in colder situations (less than -7°C) where the heat pump would not function ideally.

 

EcoSpring Heat Pump Hot Water Cylinders work much like a fridge, but in reverse. They harness the ambient temperature in the air, multiplying this energy to heat the water at a fraction of the operating costs of a traditional hot water cylinder. You will need mains water pressure.

 

How EcoSpring Works

1. A fan pulls in air containing heat energy across the evaporator.

2. The evaporator turns the liquid refrigerant into a gas.

3. The compressor converts refrigerant into high temp / high pressure gas.

4. The hot gas inside the condenser coil heats the water inside the tank.

5. The refrigerant reverts back to a liquid after heating the water & returns back to the evaporator for the process to start again.

ES190 190 Litre Cylinder - Suitable for 1-2 people

$3,999.00 Regular Price
$3,750.00Sale Price
    bottom of page